Dover Hydro Connected Total Eclipse 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Dover Hydro Connected Total Eclipse에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dover Hydro Connected Total Eclipse 17 페이지.
페이지 인쇄
installation details (continued)
Connected Total Eclipse Controller Mounting
The Connected Total Eclipse controller may be mounted either horizontally
(such as on top of the washer) or vertically (such as on the front of
the washer).
Mount the unit using the self-adhesive strips provided, or for added
security, you may use nuts and Allen bolts or other fasteners (provided) as
is appropriate to the mounting surface.
1) Position the controller for easy access to the keypad and display screen.
2) Mark a mounting location that is on, or close to, the washer. The
mounting surface must be clean and dry.
3) Join the four Velcro-style strips firmly together to form two pair.
4) Peel backing from one strip of each pair and place, adhesive-side down,
in each recess on the mounting bracket. Press firmly for good adhesion.
5) Peel backing from opposite strips and press mounting bracket onto
smooth, clean surface (use alcohol wipe, if needed) at marked location.
6) With cables connected, slide controller front down onto mounting
bracket (controller back), guiding cables into slots and pressing down
firmly until front and back snap into place.
initial controller setup
Set Operating Language
After all electrical, plumbing, and mechanical installation is complete, apply power to the Connected Total Eclipse Controller.
At the first power up, the LANGUAGE menu follows the splash screen to allow menu language selection.
Choose one of the menu languages that are pre-installed in each controller (English or Spanish for the Americas; English or
German in the EU]; or download additional Connected Total Eclipse Controller menu language files from the Hydro Systems'
website to a USB flash drive.
Installing a language from a USB flash drive to a controller can only replace the non-English menu language in the controller
as the English language option is permanently installed.
1) Move the selection box, using the Up / Down arrow keys,
defaults shown below).
(Optional) To replace the non-English language with a different language connect a USB flash drive containing the downloaded
languages to USB port "A" (the lower USB port on the controller's right side). Available languages will appear for selection.
2) Press the Enter key
US Default Language Menu
6
to select the operating language and launch the DATE & TIME menu.
LANGUAGE
ENGLISH
SPANISH
Optional
Mounting
Fasteners
Wall Mount Bracket
Cables
in Slots
until it frames your desired language (US controller
LANGUAGE
ENGLISH
SPANISH
FRANCAIS
DEUTSCH
SVENSKA
PORTUGUESE
With USB Language Drive
Velcro
Strips
Slide
Controller
Down