Combi Baby Keep Slim F62 사용 설명서 - 페이지 7
{카테고리_이름} Combi Baby Keep Slim F62에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Combi Baby Keep Slim F62 11 페이지.
페이지 인쇄
❹ Check Corner Cover Fixing Screws and Corner Bracket Fixing Screws.
①
Use the back cushion and a flat-head screw driver to
remove the plastic caps (2 pcs), then use a Phillips
screw driver No3 to remove the lower cover fixing
screws (2 locations ) and remove the lower cover.
*To disassemble the back cushion, refer to "Back
Cushion Replacement Procedure" on back cover.
Back cushion
Bottom cover fixing
screws (2 locations)
Plastic cap
③
Use a Phillips screwdriver No2 to check the
corner cover fixing screws (2 locations) and
corner bracket fixing screws (4 locations) are
not missing or loosened.
❺ Checking Anchor Bolts, Main Body Fixing Screws, and Lower Cover Fixing Screws.
After checking, assemble by the reverse procedure.
When assembling, make sure that anchor bolts (3 locations), main body fixing screws (4 locations), and lower
cover fixing screws (2 locations) are not missing or loosened.
After the assembly is completed, inspect it by referring to Daily Inspection (page 4).
Use Phillips screwdriver No3 and wrench (nominal 17MM)
C. Checking Appearance (Metal Parts)
Inspection Points
❻
Deformation or rust of main body frame
Missing, loss, deformation, rust of screws
❼
and metal fittings
D. Entering Inspection Date
After the periodic inspection, enter the inspection
date on the inspection sticker affixed to the lower
cover.
②
Use a Phillips head screwdriver No3 to remove the main
body fixing screws (4 locations) and use wrench (nominal
17mm) to remove the anchor bolts (3 locations) driven
into the floor, and then remove the main body from the
corner bracket.
Main body fixing
screws (4 locations)
Bottom cover
Corner cover fixing
screws (2 locations)
Back side of
the main body
Inspection Method
Visual
Visual
Inspection sticker
(Inspection S for 1-year silver)
7
Main Body
Corner cover
Corner bracket
Corner bracket
fixing screws
(4 locations)
Judgment Criteria
No deformation or rust
No disconnection, loss,
deformation, or rust
Corner bracket
Anchor bolts
(3 locations)
Handling of Defects
Discontinuation
of use
Replacement