Combi Baby Keep Slim F62 사용 설명서 - 페이지 9

{카테고리_이름} Combi Baby Keep Slim F62에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Combi Baby Keep Slim F62 11 페이지.

페이지 인쇄

B. Checking Missing or Loosening of Various Screws (when corner bracket is used)

*The corner bracket is sold separately.

Inspection Points

Corner cover fixing screws

❹

(Upper and lower 2 locations each)

Corner bracket fixing screws (4 locations)

❺

Main body fixing screws (8 locations)

Bottom cover fixing screws (2 locations)

❹ Checking Corner Cover Fixing Screws and Corner Bracket Fixing Screws.

①

Use a back cushion and a

flat-head screw driver to

remove the plastic caps (2 pcs),

then use a Phillips screwdriver

No3 to remove the lower cover

fixing screws (2 locations ) and

remove the lower cover.

*To disassemble the back

cushion, refer to "Back

Cushion Replacement

Procedure" on back cover.

③

Use Phillips screwdriver

No2 for the corner cover

fixing screws (Upper and

lower 2 locations each)

and use Phillips screw

driver No3 or wrench to

check the corner bracket

fixing screws (4 locations)

❺ Checking Main Body Fixing Screws and Lower Cover Fixing Screws

After checking, assemble by the reverse procedure.

When assembling, use Phillips screwdriver No3 to make sure that main body fixing screws (8 locations) and lower

cover fixing screws (2 locations) are not missing or loosened.

After the assembly is completed, inspect it by referring to Daily Inspection (page 4).

C. Checking Appearance (Metal Parts)

Inspection Points

❻

Deformation or rust of main body frame

Missing, loss, deformation, rust of screws

❼

and metal fittings

D. Entering Inspection Date

After the periodic inspection, enter the inspection

date on the inspection sticker affixed to the lower

cover.

Inspection Method

Visual, Touch

(Phillips screw driver No2、

No3、 Wrench)

Visual, Touch

(Phillips screw driver No3)

Back cushion

Bottom cover

fixing screws

(2 locations)

Plastic cap (2 pcs)

Corner cover

fixing screws

(2 locations)

Back side of

the main body

Inspection Method

Visual

Inspection sticker

(Inspection S for 1-year silver)

Judgment Criteria

No missing or looseness

②

Use a Phillips screwdriver

No3 to remove the main

body from the corner

bracket.

Body fixing screws

(8 locations)

Corner bracket

Lower cover

fixing screws

(2 locations)

Corner cover

Judgment Criteria

No deformation or rust

No disconnection, loss,

deformation, or rust

Handling of Defects

Retightening

Corner bracket

fixing screw

（4 locations)

Handling of Defects

Discontinuation

of use

Replacement