Follett HCC1010WHT 매뉴얼 - 페이지 2
{카테고리_이름} Follett HCC1010WHT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett HCC1010WHT 8 페이지. Self-contained chewblet ice machine
Follett HCC1010WHT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
Accessories
Top kit for ice and beverage dispensers (listed on page 4)
Water filters (refer to form# 9905)
Wall mount bracket (item# 01085455)
Ice machine stand, height‑adjustable (item# 01085463)
Timer to control one or two ice machines
(item# 00967265)
Longer ice transport tube, specify length: ___ ft/m in
5'/1.5 m increments (10'/3 m provided as standard for
RIDE models) (item# 00174896)
SafeCLEAN Plus
ice machine cleaner
™
1 x 8 oz (237 ml) bottle (item# 01147826)
6 x 8 oz (237 ml) bottles (item# 01149954)
Carton of 24 x 8 oz (237 ml) bottles
(item# 01149962)
SaniSponge
, 24 sanitary sponges (item# 01075431)
™
Specification
W1 Width
D1 Depth
H1 Height
Clearance
Electrical (HCC models)
208-230 V/60/1
Electrical (HCE models)
230 V/50/1
Operating power
C2 Ice transport tube
C3 Water inlet
C4 Drain
C5 Ice bin signal cord
Water-cooled ice machine
connections
Air temperature
Water temperature
Potable water pressure
Condenser water pressure
Ice production
Energy consumption
90 F (32 C) air,
70 F (21 C) water
Heat rejection
Water consumption
Water flow requirement for
water-cooled models
Refrigerant
Approximate ship weight
Approximate net weight
NOTE: For indoor use only
2
Form# 7030
Horizon Elite 1010 series
29.15" (74.0 cm)
23.25" (59.1 cm)
22.50" (57.2 cm)
top, left and right – 1.00" (2.54 cm)
C1 11 amps, requires dedicated 15 amp circuit,
6' (1.8 m) cord, NEMA 6-15 plug
C1 11 amps, requires dedicated 15 amp circuit,
6' (1.8 m) cord only, no plug
2.4 kW
see page 8 for details
3/8" OD push-in water inlet – internal connection
3/4" MPT, 1" drain required. See page 7 for details.
for Vision applications only
C6 – 1/4" FPT condenser inlet
C7 – 1/4" FPT condenser outlet
50 -100 F (10 - 38 C)
45 - 90 F (7 - 32 C)
10 - 70 psi (69 - 483 kPa)
30 - 150 psi (207-1034 kPa)
60 Hz models and 50 Hz water-cooled models see page 8
50 Hz air-cooled models at 70 F (21 C) air, 50 F (10 C) water –
865 lb (393 kg)
50 Hz air-cooled models at 90 F (32 C) air, 70 F (21 C) water –
734 lb (333 kg)
air-cooled models – 4.80 kWh
water-cooled models – 4.20 kWh
per 100 lb (45.4 kg) ice
air-cooled models – 11,300 BTU/hr (2,849 Kcal/hr)
water-cooled models – 12,800 BTU/hr (3,228 Kcal/hr)
12.0 gal (45 L) of potable water per 100 lb (45.4 kg) of ice (per
AHRI test standards). 12.4 gal (46.9 L) at low TDS flush setting.
1 gallon per minute
R404a for 60 Hz models and 50 Hz water-cooled models
R449a for 50 Hz air-cooled models
275 lb (125 kg)
265 lb (120 kg)
Dimensional drawing
D1
W1
air
intake
Horizon Elite 1410 series
29.15" (74.0 cm)
25.15" (63.9 cm)
22.50" (57.2 cm)
top, left and right – 1.00" (2.54 cm)
C1 14 amps, requires dedicated 20 amp circuit,
6' (1.8 m) cord, NEMA 6-20 plug
C1 14 amps, requires dedicated 20 amp circuit,
6' (1.8 m) cord only, no plug
3.1 kW
see page 8 for details
3/8" OD push-in water inlet – internal connection
3/4" MPT, 1" drain required. See page 7 for details.
for Vision applications only
C6 – 1/4" FPT condenser inlet
C7 – 1/4" FPT condenser outlet
50 -100 F (10 - 38 C)
45 - 90 F (7 - 32 C)
10 - 70 psi (69 - 483 kPa)
30 - 150 psi (207-1034 kPa)
60 Hz and 50 Hz models see page 8
air-cooled models – 4.84 kWh
water-cooled models – 3.80 kWh
per 100 lb (45.4 kg) ice
air-cooled models – 16,000 BTU/hr (4,035 Kcal/hr)
water-cooled models – 16,400 BTU/hr (4,135 Kcal/hr)
12.0 gal (45 L) of potable water per 100 lb (45.4 kg) of ice (per
AHRI test standards). 12.3 gal (46.5 L) at low TDS flush setting.
1 gallon per minute
R404a for 60 Hz and 50 Hz models
305 lb (138 kg)
295 lb (134 kg)
Self-contained 1010, 1410 series ice machine
for 1410 models only
H1
C2
C1
C5
C3
20.84"
(52.9 cm)
17.49"
(44.4 cm)
15.00"
(38.1 cm)
C7
C6
C4
2.73"
(6.93 cm)
2.30"
3.34"
(5.84 cm)
(8.48 cm)
10.44"
(26.5 cm)
12.25"
(31.1 cm)