Combi F72 사용 설명서 및 검사 매뉴얼 - 페이지 8

{카테고리_이름} Combi F72에 대한 사용 설명서 및 검사 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Combi F72 8 페이지. Baby keep fit

Parts Replacement Procedure Manual

If any abnormality is detected during daily inspection or periodic inspection, and the parts are replaced with new ones.

Read this replacement procedure manual thoroughly to replace them correctly.

Back Cushion Replacement Procedure

If any abnormalities in the back cushion

are found, it is recommended to pur-

chase a back cushion to replace it using

the method shown on the right.

Warning

After replacing parts, be sure to inspect

them in accordance with the contents of

"Daily Inspection" on page 4.

After replacement, use the reverse procedure to install the back cushion.

Seat Pad Replacement Procedure

If any abnormalities in the seat pad are

found, it is recommended to purchase a

seat pad to replace it using the method

shown on the right.

Warning

After replacing parts, be sure to inspect

them in accordance with the contents of

"Daily Inspection" on page 4.

After replacement, install the seat pad using the reverse procedure.

Combi Baby Keep Fit F72

1 Insert a flat-head screwdriver into

the insertion guide and lift the back

cushion.

(There is a guide for inserting at the

center of the bottom of the back

cushion)

Back cushion

The seat pad is mounted with dou-

ble-sided tape.

Seat pad

2 Remove the lower part of the back

cushion from the back plate, and

pull the whole back cushion toward

you to remove it from the back

plate.

Back plate

After removing the seat pad, remove the

adhesive remaining on the main body com-

pletely. If a new seat pad is applied while

the adhesive remains, it makes it easier to

peel off.

This manual can also be downloaded (PDF) from the CombiWith

website. Please make the best use of it.

Back cushion

Caution

(A4) 133856040 190131(1)