Combi F72 Manual de instruções e manual de inspeção - Página 8
Procurar online ou descarregar pdf Manual de instruções e manual de inspeção para Mobiliário para bebés e crianças Combi F72. Combi F72 8 páginas. Baby keep fit
Imprimir páginaParts Replacement Procedure Manual
If any abnormality is detected during daily inspection or periodic inspection, and the parts are replaced with new ones.
Read this replacement procedure manual thoroughly to replace them correctly.
Back Cushion Replacement Procedure
If any abnormalities in the back cushion
are found, it is recommended to pur-
chase a back cushion to replace it using
the method shown on the right.
Warning
After replacing parts, be sure to inspect
them in accordance with the contents of
"Daily Inspection" on page 4.
After replacement, use the reverse procedure to install the back cushion.
Seat Pad Replacement Procedure
If any abnormalities in the seat pad are
found, it is recommended to purchase a
seat pad to replace it using the method
shown on the right.
Warning
After replacing parts, be sure to inspect
them in accordance with the contents of
"Daily Inspection" on page 4.
After replacement, install the seat pad using the reverse procedure.
Combi Baby Keep Fit F72
1 Insert a flat-head screwdriver into
the insertion guide and lift the back
cushion.
(There is a guide for inserting at the
center of the bottom of the back
cushion)
Back cushion
The seat pad is mounted with dou-
ble-sided tape.
Seat pad
2 Remove the lower part of the back
cushion from the back plate, and
pull the whole back cushion toward
you to remove it from the back
plate.
Back plate
After removing the seat pad, remove the
adhesive remaining on the main body com-
pletely. If a new seat pad is applied while
the adhesive remains, it makes it easier to
peel off.
This manual can also be downloaded (PDF) from the CombiWith
website. Please make the best use of it.
Back cushion
Caution
(A4) 133856040 190131(1)