Follett Horizon Elite H E1410ABT Series 설치 지침 매뉴얼 - 페이지 8
{카테고리_이름} Follett Horizon Elite H E1410ABT Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Horizon Elite H E1410ABT Series 16 페이지.
페이지 인쇄
4.2
Air-cooled ice machines only
➋
➏
➍
➎
§ Rough-in ice machine potable water supply
push-in connection will be made at included shut-off
valve then at back of docking station into solenoid.
§ Remove access panel if necessary
§ Connect the silicone tubing to the ice machine 3/4"
➌
drain barb
.
§ Assemble the 3/4" barb x 3/4" FPT to the 3/4" MPT
x 1" slip. Connect the other end of the silicone
tubing to the 3/4" barb
§ Connect the 1" slip fitting to the 1" stand pipe/drain
➎
.
Note: Minimum 8" radius on silicone drain line.
Drain line from the ice machine must have
at least 1/4" per foot pitch (6,4 mm/0,3 m).
§ Apply Petrol-gel to barbed drain fitting
§ Replace access panel.
8
➊
➌
Minimum 8"
radius
2 ft. x 1" OD
silicone tubing
3/4" barb x 3/4" FPT
3/4" MPT x 1" slip
1" Stand pipe/Drain
➋
.
➍
.
➏
Horizon 710/1010/1410
4.3
Water-cooled ice machines only
➏
➊
. 3/8"
§ Rough-in ice machine potable water supply
3/8" push-in connection will be made at included
shut-off valve then at back of docking station into
solenoid.
§ Remove access panel if necessary
§ Connect the silicone tubing to the ice machine
3/4" drain barb
§ Assemble the 3/4" barb x 3/4" FPT to the 3/4"
MPT x 1" slip. Connect the other end of the
silicone tubing to the 3/4" barb
§ Connect the 1" slip fitting to the 1" stand pipe/
➎
drain
Note: Minimum 8" radius on silicone drain
line. Drain line from the ice machine
must have at least 1/4" per foot pitch
(6,4 mm/0,3 m).
§ Connect cooling water supply
§ Apply Petrol-gel to barbed drain fitting
§ Replace access panel.
➊
➋
➐
➌
➑
2 ft. x 1" OD
silicone tubing
3/4" barb x 3/4" FPT
➍
3/4" MPT x 1" slip
➎
1" Stand pipe/Drain
➌
.
➍
.
➏
BIN • TOP-MOUNT
Minimum 8"
radius
➊
.
➋
.
.
➐
and return
➑