Caraudio-Systems c.LOGiC lite C1-MFD3 매뉴얼 - 페이지 7

{카테고리_이름} Caraudio-Systems c.LOGiC lite C1-MFD3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems c.LOGiC lite C1-MFD3 12 페이지. For navigation systems volkswagen mfd3/rns510, rns810 skoda columbus seat trinax

페이지 인쇄

3.2.

Connections to head-unit

Remove the head-unit from the dash-board.

Transfer female Quadlock connector from the back of the head-unit to male

Quadlock connector of harness TV-VW02.

Plug female Quadlock connector of TV-VW02 into male Quadlock socket of

head-unit.

Plug female 26pin AMP-connector of C1C-VW03 into male 26pin AMP-socket of

head-unit.

Note: If the 26pin AMP-socket of the head-unit is already occupied, the vehicle probably has

a factory rear-view camera or a factory TV-tuner. In case of a factory tuner, it must be

uninstalled: disconnect the female 26pin AMP-connector of the factory harness and

disconnect all wires from the factory TV-tuner. In case of a factory rear-view camera you

have ordered/received the wrong product, call for support.

3.3.

Connecting peripheral devices

It is possible to connect one after-market AV-source and an after-market rear-view camera

to the c.LOGiC Interface.

Before final installation of the peripheral devices, we recommend to test-run the c.LOGiC

functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral

devices as soon as possible.

Version 24.01.2012

C1-MFD3