Caraudio-Systems c.LOGiC lite C1-MFD3 Manuel - Sayfa 7
Kayıt Ekipmanları Caraudio-Systems c.LOGiC lite C1-MFD3 için çevrimiçi göz atın veya pdf Manuel indirin. Caraudio-Systems c.LOGiC lite C1-MFD3 12 sayfaları. For navigation systems volkswagen mfd3/rns510, rns810 skoda columbus seat trinax
Sayfayı Yazdır3.2.
Connections to head-unit
Remove the head-unit from the dash-board.
Transfer female Quadlock connector from the back of the head-unit to male
Quadlock connector of harness TV-VW02.
Plug female Quadlock connector of TV-VW02 into male Quadlock socket of
head-unit.
Plug female 26pin AMP-connector of C1C-VW03 into male 26pin AMP-socket of
head-unit.
Note: If the 26pin AMP-socket of the head-unit is already occupied, the vehicle probably has
a factory rear-view camera or a factory TV-tuner. In case of a factory tuner, it must be
uninstalled: disconnect the female 26pin AMP-connector of the factory harness and
disconnect all wires from the factory TV-tuner. In case of a factory rear-view camera you
have ordered/received the wrong product, call for support.
3.3.
Connecting peripheral devices
It is possible to connect one after-market AV-source and an after-market rear-view camera
to the c.LOGiC Interface.
Before final installation of the peripheral devices, we recommend to test-run the c.LOGiC
functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral
devices as soon as possible.
Version 24.01.2012
C1-MFD3