Downee Spring Gate 설치 매뉴얼 - 페이지 11
{카테고리_이름} Downee Spring Gate에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Downee Spring Gate 14 페이지. Double gates
페이지 인쇄PROGRAMMING
1.
Position the gate half way between open/closed. Lock the Arm using the
Key in front of Motor.
2.
Using the buttons (above) on the Control Board, Scroll to P030 & press
OK
3.
Scroll to d002 & press OK. Display will show P030
4.
Press the top button three (3) times. P003 shows on digital display.
5.
Press middle button once (1) APPr flashes.
6.
Press & hold the middle button till APPr stops flashing.
7.
The gate will fully open & close automatically to find where the Stops
are placed. The gate should finish in the closed position.
_ _ _ _
8.
done.
_| |_
wires between the terminals.
8
This symbol is for 'Gate Closed'. It shows on screen when
If you see this, the 'Gate Open' symbol, swap the brown and blue
PROGRAMMING IS FINISHED!
Digital
Display
Programming
Buttons
Scroll up
OK
Scroll down