Doxa SUB 300T Divingstar Poseidon Edition 매뉴얼 - 페이지 4
{카테고리_이름} Doxa SUB 300T Divingstar Poseidon Edition에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doxa SUB 300T Divingstar Poseidon Edition 8 페이지.
페이지 인쇄DOXA
automatic
S W I S S M A D E
P1 P2 P3 P4
8
SUB 300T
Divingstar
SUB 300T
O W N E R S
M A N U A L
GETTING STARTED
P1 NORMAL POSITION
(SCREWED-DOWN, NORMAL OPERATION)
Your DOXA is equipped with a screw-in
crown that keeps your watch water resistant
at depths up to 1000 meters/3300 feet.
Please make sure the screw-in crown is
screwed down before submerging your
watch in water.
The SUB 300T is equipped with an
automatic (self-winding) movement that is
wound by the normal movement of your
wrist.
Before you wear your DOXA SUB 300T
for the first time (or after a long period of not
wearing your watch), you will need to
manually wind it to get it started.
IMPORTANT – NEVER shake your self-
winding watch to get it started. This can
damage the movement.
P2 Winding Position
(for manually winding the watch)
To manually wind the watch:
Please unscrew the crown by turning it
counterclockwise. It will gently "pop" when
the crown has been completely unscrewed.
The crown is now in Position 2 (P2).
With the crown in Position 2 (P2) please
gently turn the crown 30 - 50 times in a
clockwise direction.
P6
This will sufficiently wind the movement so
that it has sufficient power to begin wearing.
Now that you have manually wound the
watch, your normal wrist and arm
movements will continue to generate power
reserve in the watch, literally "self-winding"
it. When fully-wound, your SUB 300T
should have an average power reserve of 42
hours.
P3 Date Setting Position
To set the date:
Gently pull the crown once to Position 3
(P3) and turn it clockwise to adjust the date.
In months with fewer than 31 days, you will
need to manually advance the date at the
end of the month.
IMPORTANT - Please do not manually
change the date when the hour hand is
between 10:00 PM and 2:00 AM. The
automatic date function of the watch is
actively engaged during this four hour
period (the pinions are being repositioned to
carry out the automatic date change), and
by manually engaging the date while the
hour hand in this four hour period it is
possible to damage the self-winding
movement.