Doxa SUB 300T Divingstar Poseidon Edition Manual - Page 4

Browse online or download pdf Manual for Watch Doxa SUB 300T Divingstar Poseidon Edition. Doxa SUB 300T Divingstar Poseidon Edition 8 pages.

Print Page

DOXA

automatic

S W I S S M A D E

P1 P2 P3 P4

SUB 300T

Divingstar

SUB 300T

O W N E R S

M A N U A L

GETTING STARTED

P1 NORMAL POSITION

(SCREWED-DOWN, NORMAL OPERATION)

Your DOXA is equipped with a screw-in

crown that keeps your watch water resistant

at depths up to 1000 meters/3300 feet.

Please make sure the screw-in crown is

screwed down before submerging your

watch in water.

The SUB 300T is equipped with an

automatic (self-winding) movement that is

wound by the normal movement of your

wrist.

Before you wear your DOXA SUB 300T

for the first time (or after a long period of not

wearing your watch), you will need to

manually wind it to get it started.

IMPORTANT – NEVER shake your self-

winding watch to get it started. This can

damage the movement.

P2 Winding Position

(for manually winding the watch)

To manually wind the watch:

Please unscrew the crown by turning it

counterclockwise. It will gently "pop" when

the crown has been completely unscrewed.

The crown is now in Position 2 (P2).

With the crown in Position 2 (P2) please

gently turn the crown 30 - 50 times in a

clockwise direction.

This will sufficiently wind the movement so

that it has sufficient power to begin wearing.

Now that you have manually wound the

watch, your normal wrist and arm

movements will continue to generate power

reserve in the watch, literally "self-winding"

it. When fully-wound, your SUB 300T

should have an average power reserve of 42

hours.

P3 Date Setting Position

To set the date:

Gently pull the crown once to Position 3

(P3) and turn it clockwise to adjust the date.

In months with fewer than 31 days, you will

need to manually advance the date at the

end of the month.

IMPORTANT - Please do not manually

change the date when the hour hand is

between 10:00 PM and 2:00 AM. The

automatic date function of the watch is

actively engaged during this four hour

period (the pinions are being repositioned to

carry out the automatic date change), and

by manually engaging the date while the

hour hand in this four hour period it is

possible to damage the self-winding

movement.