AmpliVox Mity-Vox SW212 사용자 설명서 - 페이지 3
{카테고리_이름} AmpliVox Mity-Vox SW212에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AmpliVox Mity-Vox SW212 7 페이지. Wireless pa
페이지 인쇄
PACKAGE CONTENTS
SW212 Amplified Speaker
Wireless Handheld Microphone
Wireless Transmitter
Lapel Microphone
Headset Microphone
Power Cord
1/4" - 1/4" Line Cord
Protective Cover/Carry Case
MICROPHONES
BATTERIES
Handheld Wireless Microphone - Screw off
the lower bottom section of microphone and
insert a 9V rechargeable battery.
Wireless Bodypack - Slide open the case
and insert a 9V rechargeable battery.
These batteries can be recharged inside of
the SW212 (see Back Features).
Battery life is about 8 hours.
Alakline batteries can be used but cannot be
recharged.
TIPS
Take care in selecting volume level, and speaker placement so that acoustic feedback (howling and screeching) will
be avoided.
Also, microphones that are farther from the sound source, such as lapel, require more acoustic gain and thus are
also more prone to feedback than close-source microphones such as handheld or headset microphones that are
used close to the mouth.
SPECIFICATIONS
Rated Power Output:
AC Power:
Wireless Range:
VHF Wireless Frequency: 165 - 265 MHz
Speaker:
Frequency Response:
Sensitivity:
Weight:
Dimensions (HWD ): 11.25 in. H x 9 in. W x 6.5 in. D
GAIN CONTROL
MICROPHONE OPERATION
Turn on SW212, Set Wireless Microphone Volume Control
at half way.
Handheld Wireless Microphone - Slide switch to the
"ON position. Talk into microphone and adjust volume.
Wireless Bodypack - Connect either the Lapel or
Headset Microphone into the input jack on the Wire-
less Bodypack. Set Gain Control at half way. Slide the
Power Switch to ON. LED will light. Speak into micro-
phone and adjust the Gain control to desired loud-
ness. NOTE: The center position of the Power Switch
is to be used when you want to temporarily quite mi-
crophone.
3
30 W Dynamic
110 V
61 to 128 ft.
6 1/2"
100Hz to 15KHz
60dB
7.5 lbs.
MICROPHONE INPUT JACK
POWER SWITCH
OFF—STANDBY—ON