Amprobe AT-6000-R 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Amprobe AT-6000-R에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe AT-6000-R 10 페이지. At-6000 series. advanced wire tracer

Special Applications: Finding Breaks

Set-up:

Transmitter

indicator

showing signal

in HIGH mode

1. Ensure the wire is De-energized.

2. Connect the Transmitter with the test leads

to the circuit.

3. Select HIGH signal mode by pressing HI.

Precision tracing mode:

Tracing a cable to find

breaks or opens

Amprobe

| [email protected] | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)

AT-6000-T

TRANSMITTER

Set-up:

Receiver

Precision

tracing mode

1. Turn on the Receiver.

2. Press the MODE button until the Precision

Tracing function is selected.

1. Start tracing the cable until the

2. Verify the place of the fault:

Note:

For best results, ground all

De-energized wires that run in

parallel with the black test lead.

For detailed specifications and ordering go to amprobe.com 6010521 A

NCV

signal stops.

move the Transmitter to the other

end of the wire and repeat tracing

from the opposite end. If the signal

stops at the exact same location the

fault has been located.