Amprobe AT-6000-R Hızlı Başlangıç Kılavuzu - Sayfa 7
Ölçüm Cihazları Amprobe AT-6000-R için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Amprobe AT-6000-R 10 sayfaları. At-6000 series. advanced wire tracer
Sayfayı Yazdır
Special Applications: Finding Breaks
1
Set-up:
Transmitter
Transmitter
indicator
showing signal
in HIGH mode
1. Ensure the wire is De-energized.
2. Connect the Transmitter with the test leads
to the circuit.
3. Select HIGH signal mode by pressing HI.
Precision tracing mode:
Tracing a cable to find
breaks or opens
Amprobe
| [email protected] | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
®
AT-6000-T
TRANSMITTER
HI
LO
2
Set-up:
Receiver
Precision
tracing mode
1. Turn on the Receiver.
2. Press the MODE button until the Precision
Tracing function is selected.
1. Start tracing the cable until the
2. Verify the place of the fault:
Note:
For best results, ground all
De-energized wires that run in
parallel with the black test lead.
©2018 Amprobe
®
For detailed specifications and ordering go to amprobe.com 6010521 A
88
NCV
signal stops.
move the Transmitter to the other
end of the wire and repeat tracing
from the opposite end. If the signal
stops at the exact same location the
fault has been located.
5