Follett FZR4-ADA 설치, 운영 및 서비스 매뉴얼 - 페이지 10

{카테고리_이름} Follett FZR4-ADA에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett FZR4-ADA 20 페이지. Undercounter freezer
Follett FZR4-ADA에 대해서도 마찬가지입니다: 설치, 운영 및 서비스 매뉴얼 (20 페이지)

페이지 인쇄

Cleaning ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

CAUTION!

Use only non-chlorine based cleaners. Cleaners containing chlorine can cause staining and pitting of the

stainless steel.

Interior

Using a sponge or soft cloth, clean unit with a non-abrasive, non-chlorinated, all-purpose detergent.

Exterior

Wipe exterior with a soft cloth in the direction of grain as needed. Stainless steel polish may be used to enhance

the finish of the unit.

Annual Cleaning and Inspection

1. Shut down unit by moving rocker switch on the lower front

panel to the OFF position and removing power cord from

receptacle.

2. Remove 6 screws from front panel.

3. Remove lower front panel (Fig. 11.1).

Note: Front louvered panel may be completely removed for easier

cleaning by disconnecting the controller wiring plugs from the

freezer.

4. Remove drain pan (Fig. 11.2).

5. Clean drain pan with a non-abrasive, non-chlorinated all-

purpose detergent.

6. Reinstall drain pan.

Use a vacuum cleaner with brush attachment to clean

condenser through lower front panel and compressor motor

and related parts through lower rear panel.

8. Reinstall lower front panel.

9. Remove interior shelves.

10. Remove evaporator cover (six screws).

11. Using hair drier, melt all ice from evaporator coil and drain

pan.

12. Using a piece of wire, confirm that drain tube is free of ice

and clear of any blockage.

13. Check evaporator fan for smooth operation.

14. Reinstall evaporator cover.

15. Reinstall shelves.

FZR Undercounter Freezer

Fig. 11