Amprobe AM-420 사용자 설명서 - 페이지 15

{카테고리_이름} Amprobe AM-420에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe AM-420 16 페이지. Digital multimeter

BATTERY AND FUSE REPLACEMENT

X�

Warning

To avoid shock, injury, or damage to the Meter, disconnect the test lead from

the measuring circuit before opening case. Use ONLY fuse with the amperage,

interrupt, voltage, and speed ratings specified.

Replacing BATTERY and FUSE follow below steps:

1. Disconnect the test lead probe from measuring circuit.

2. Turn the Meter to OFF position.

3. Remove holster and the screws from the back cover, and then open the back

cover.

4. Battery replacement: Remove the battery and replace with one 9 V Alkaline

battery (6LF22, 6LR61, MN1604) or equivalent. Pay attention to the polarity

signs.

5. Fuse replacement: Replace the broken fuse F1 with rating 315 mA H 250 V

fast-fuse, ( 5×20)mm.

6. Put the back cover back, re-fasten the screw and install the holster back.

Battery: 9 V alkaline batteries (6LF22, 6LR61, MN1604) or equivalent

Fuse: 315 mA H 250 V fast-fuse, ( 5×20)mm

Fuse