Amprobe TMD-51 사용자 설명서 - 페이지 11

{카테고리_이름} Amprobe TMD-51에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe TMD-51 15 페이지. Thermocouple thermometer k/j type with memory

holding down the "MAX/MIN" key for 2 seconds to exit

and erased recorded reading.

"CLR/READ" Button

Press "READ" key to enter READ Mode, the "READ"

annunciator is displayed at upper-right corner. Press "p"

or "q" key to review the data you recorded. The LCD

automatically scrolls data and index.

Pressing "CLR" key and holding down for 2 seconds to

clear the memory data.

There are 125 data could be recorded into memory.

Press "REC" key to record the data, press once to record

another one till the memory is full. When the data is

recorded, "REC" mark is displayed at the Upper-Right

corner. If the memory is full, data will not be recorded

into the memory and "REC" mark will not be displayed.

Data can be recorded after it is cleared.

"T1 T2/T1-T2/

" Button

Press "T1", "T2", "T1-T2" key to select input mode

T1, T2 or T1-T2. The input selection indicates which

input is selected for display. T1 thermocouple, T2

thermocouple or the differential between the two

thermocouples(T1-T2), when the thermocouple is turned

on, it is set to T1.