Folyon H300P 사용자 설명서 - 페이지 6

{카테고리_이름} Folyon H300P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Folyon H300P 17 페이지. Temperature humidity chamber with watlow pm plus controllers

Figure 2: Desiccant Reservoir Pulled From H300P

•

Unscrew the reservoir plug and remove the spring, dust filter and metal mesh.

•

Remove the used desiccant. The used desiccant can be regenerated by heating it above 395°F

(200°C) for one to two hours.

•

Fill the reservoir with a fresh desiccant. Do not overfill or underfill.

•

Replace the dust filter, followed by the metal mesh, followed by the spring.

•

Screw the reservoir plug until tight. The spring should compress when the plug is tight.

•

If the spring does not compress, there is not enough desiccant in the reservoir.

•

If the spring compresses too much, so that it is excessively difficult to screw the reservoir plug, there

is too much desiccant in the reservoir.

H300P Temperature Humidity Chamber

Page 6