COMECO TI08-R 운영 매뉴얼 - 페이지 3

{카테고리_이름} COMECO TI08-R에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. COMECO TI08-R 13 페이지. Process indicator (trip alarm unit)

Wiring

Important notes:

♦

Power supply must be turned off

during mounting and wiring!

♦

With cases 'B', 'H', and 'V', use terminal A10

for range 0...10 V, and A11 – for other.

♦

In case of a TI08-L with 90...250 V

power supply, use terminal 8 for grounding,

and 5 – for input wiring, and adjust

the jumper as shown on the device label.

♦

Connecting a potentiometer requires

excitation voltage of 5 V, 10 mA

(see 'Specifications').

Input signal wiring

Connect the input

with regard to its type

through the respective and

depending on the case type

(see 'Specifications')

terminals on the device back.

Voltage transmitters

should be powered

ONLY

by external source!

Output wiring

Connect the outputs

with regard to their types

(see 'Specifications')

via the respective terminals.

Power supply wiring

Connect the right power

supply voltage for your device

(see 'Specifications')

through the respective

terminals.

More detailed

wiring schematics

are available at

comecogroup.com

under 'Support' tab.