COMECO TI08-R Panduan Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Panel sentuh COMECO TI08-R. COMECO TI08-R 13 halaman. Process indicator (trip alarm unit)
Halaman Cetak
Wiring
Important notes:
♦
Power supply must be turned off
during mounting and wiring!
♦
With cases 'B', 'H', and 'V', use terminal A10
for range 0...10 V, and A11 – for other.
♦
In case of a TI08-L with 90...250 V
power supply, use terminal 8 for grounding,
and 5 – for input wiring, and adjust
the jumper as shown on the device label.
♦
Connecting a potentiometer requires
excitation voltage of 5 V, 10 mA
(see 'Specifications').
Input signal wiring
Connect the input
with regard to its type
through the respective and
depending on the case type
(see 'Specifications')
terminals on the device back.
Voltage transmitters
should be powered
ONLY
by external source!
Output wiring
Connect the outputs
with regard to their types
(see 'Specifications')
via the respective terminals.
Power supply wiring
Connect the right power
supply voltage for your device
(see 'Specifications')
through the respective
terminals.
More detailed
wiring schematics
are available at
comecogroup.com
under 'Support' tab.
3