DPM FL27 매뉴얼 - 페이지 6
{카테고리_이름} DPM FL27에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DPM FL27 17 페이지. Led floodlight
페이지 인쇄
should only be installed on vertical surfaces or in the ground
at a minimum distance 0.5 m from the illuminated object Do
not look directly into the floodlight while it's lighting.
1. Before starting the assembly, disconnect the mains supply.
2. Screw the floodlight to the wall or ground.
3. Connect power supply wires to the appropriate wiring in
the floodlight. It is recommended to use airtight cans and
electrical connection cords.
red wire – phase (L)
blue wire – neutral (N)
green / yellow wire – ground (PE)
4. Secure the power cable for the floodlight.
5. Set the beam angle and tighten the retaining screws.
6
WARRANTY
The warranty terms are available at
http://www.dpm.eu/gwarancja