Amptek X-123 사용자 설명서 - 페이지 7

{카테고리_이름} Amptek X-123에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amptek X-123 18 페이지.
Amptek X-123에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (12 페이지)

more susceptible to electromagnetic interference, grounding, etc.

4.4.

Other configurations options – See Amptek.com for details on other configuration options.

4.4.1.

OEM options

solutions-for-xrf-systems

4.4.2.

Vacuum Options

eds/vacuum-applications-for-amptek-detectors

4.5.

XR100 Interface

4.5.1.

Another option, shown above with the X123 box removed, is the using the XR100 preamplifier

box with the X123 Electronics. This uses a BNC and 6-pin Lemo connected to the XR100 box, and the

cables run to 2 flat Molex connectors on the DP5/PC5 stack. This option uses a special config of the

DP5/PC5 in which the preamplifier voltage is +/- 8.5V instead of the normal +/- 5V on all the other

options.

4.6.

Vacuum Use

4.6.1.

The X-123 is suitable for vacuum applications, e.g., in EDS. The photo illustrates an X-123 with

flex cables to the vacuum flange, and with the preamplifier and detector in the vacuum space. This

design is not suitable for Ultra-High Vacuum (Amptek provides other systems appropriate for UHV) and

the entire X-123 should not be placed in vacuum.

detectors/accessories-for-xrf-eds/vacuum-applications-for-amptek-detectors

ACH417 cable (air)

X-123 User Manual

https://www.amptek.com/products/x-ray-detectors/oem-xrf-solutions/oem-

https://www.amptek.com/products/x-ray-detectors/accessories-for-xrf-

9D-275 flange

https://www.amptek.com/products/x-ray-

ACH495 cable (vacuum)