Amptek X-123 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Датчики безпеки Amptek X-123. Amptek X-123 18 сторінок.
Також для Amptek X-123: Посібник із швидкого старту (4 сторінок), Посібник користувача (12 сторінок)
Друкувати сторінкуmore susceptible to electromagnetic interference, grounding, etc.
4.4.
Other configurations options – See Amptek.com for details on other configuration options.
4.4.1.
OEM options
solutions-for-xrf-systems
4.4.2.
Vacuum Options
eds/vacuum-applications-for-amptek-detectors
4.5.
XR100 Interface
4.5.1.
Another option, shown above with the X123 box removed, is the using the XR100 preamplifier
box with the X123 Electronics. This uses a BNC and 6-pin Lemo connected to the XR100 box, and the
cables run to 2 flat Molex connectors on the DP5/PC5 stack. This option uses a special config of the
DP5/PC5 in which the preamplifier voltage is +/- 8.5V instead of the normal +/- 5V on all the other
options.
4.6.
Vacuum Use
4.6.1.
The X-123 is suitable for vacuum applications, e.g., in EDS. The photo illustrates an X-123 with
flex cables to the vacuum flange, and with the preamplifier and detector in the vacuum space. This
design is not suitable for Ultra-High Vacuum (Amptek provides other systems appropriate for UHV) and
the entire X-123 should not be placed in vacuum.
detectors/accessories-for-xrf-eds/vacuum-applications-for-amptek-detectors
ACH417 cable (air)
X-123 User Manual
https://www.amptek.com/products/x-ray-detectors/oem-xrf-solutions/oem-
https://www.amptek.com/products/x-ray-detectors/accessories-for-xrf-
9D-275 flange
https://www.amptek.com/products/x-ray-
ACH495 cable (vacuum)
7