Amptone Lab Midi splitter 사용자 설명서 - 페이지 2

{카테고리_이름} Amptone Lab Midi splitter에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amptone Lab Midi splitter 4 페이지. 1-in 4-out midi thru box

SETUP

Follow the steps below to learn how to set your MIDI Splitter up.

CONNECTING POWER SOURCE

MIDI Splitter can be powered by a battery or a DC power supply.

Power supply is a primary power source – battery will be used only

when power supply is not plugged in to MIDI Splitter.

Battery: lift the drawer located on the side and pull it. Put the

9V battery in the drawer, making sure the positive and negative

terminals are inserted correctly and push the drawer back in.

Power supply: insert 2.1 mm 9V DC power plug (center negative)

into DC IN port located on the side of the device.

Lift and pull the drawer to insert battery

CONNECTING MIDI HARDWARE

Connections between MIDI Splitter and other MIDI hardware

should be made with a standard MIDI DIN-5 cable.

MIDI input: connect MIDI OUT port of your MIDI controller to MIDI

IN port on MIDI Splitter.

MIDI thru: connect MIDI IN ports of devices you are willing to

control to MIDI OUT 1-4 ports on MIDI Splitter.

MIDI Splitter status/data LED