Amptone Lab Midi splitter Kullanıcı Kılavuzu - Sayfa 2
Müzik Ekipmanları Amptone Lab Midi splitter için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amptone Lab Midi splitter 4 sayfaları. 1-in 4-out midi thru box
Sayfayı YazdırSETUP
Follow the steps below to learn how to set your MIDI Splitter up.
CONNECTING POWER SOURCE
MIDI Splitter can be powered by a battery or a DC power supply.
Power supply is a primary power source – battery will be used only
when power supply is not plugged in to MIDI Splitter.
Battery: lift the drawer located on the side and pull it. Put the
9V battery in the drawer, making sure the positive and negative
terminals are inserted correctly and push the drawer back in.
Power supply: insert 2.1 mm 9V DC power plug (center negative)
into DC IN port located on the side of the device.
Lift and pull the drawer to insert battery
CONNECTING MIDI HARDWARE
Connections between MIDI Splitter and other MIDI hardware
should be made with a standard MIDI DIN-5 cable.
MIDI input: connect MIDI OUT port of your MIDI controller to MIDI
IN port on MIDI Splitter.
MIDI thru: connect MIDI IN ports of devices you are willing to
control to MIDI OUT 1-4 ports on MIDI Splitter.
MIDI Splitter status/data LED