DPS Turbonator VGT 설치 매뉴얼 - 페이지 12
{카테고리_이름} DPS Turbonator VGT에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DPS Turbonator VGT 13 페이지.
페이지 인쇄____________________________________________________________________________
Exhaust Pressure Sensor Mounting Bracket Installation Instruction
_____________________________________________________________________________________
1. Attach the pressure sensor mounting bracket onto the firewall using self tapping screw, in such
a way that the pressure sensor is vertical (electrical plug side up). Condensation can occur in the
copper tube and MUST BE MOUNTED UPRIGHT to drain the water away from the sensor.
MOUNT SENSOR AWAY FROM EXHAUST COMPONENTS.
2. Route the copper tube in such a way that it is on a constant downward slope from sensor to
turbine housing fitting. Use the provided PVC pipe as a mandrel to bend the tube around so it
does not kink. (See the next page for pictures)
3. Attach the copper tube to the sensor and fitting in turbine housing and tighten.
Revision 1.3
Revision Date 1/28/2020
www.dieselpowersource.com
Turbonator® VGT Controller