DPS Telecom Net Dog 82 IP 운영 매뉴얼 - 페이지 8
{카테고리_이름} DPS Telecom Net Dog 82 IP에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DPS Telecom Net Dog 82 IP 12 페이지.
페이지 인쇄
T (8 sec)
C (1 min)
C
F (5 min)
Note: default times shown
Fig. 17 - When a target fails to respond to a ping
within the fail time period, a fault is declared.
9. Save Changes
To make changes effective, select N)Vram, then
W)rite from the main menu. (See Fig. 18)
Note: Selecting N)Vram and then W)rite saves the full
configuration into memory.
Fig. 18 - To make changes effective, select
N)Vram, then W)rite from the main menu.
Table I - N)Vram Submenu Fields
Field
Show
Dumps RAM (For DPS Tech)
Write
Saves configuration to NVRAM
Reset
Overwrites existing operating configuration
with last configuration "written" to NVRAM
10. Restart
Power down and power up Net Dog so it can do a
full system restart.
This resets the network stack. Now Net Dog can use
the new Ethernet settings.
D-PC-295-10A-0V
May 5, 2000
C
C
C
Description
Monitor Section
You can connect a PC running terminal emulation
software to the configuration port and monitor alarms,
operate controls, display status of pinged devices and
display status of the Net Dog.
Fig. 19 - To view alarm status, select A)larms from
the M)onitor menu.
1. Monitoring Alarms
a. Select M)onitor from the main menu.
b. Select A)larms from the Monitor submenu. The cur-
rent status of the eight discrete alarm points will be
displayed. (See Fig. 19)
c. You can now select another monitor function or
press <Esc> to return to the main menu.
2. Displaying Pinged Device Status
a. Select M)onitor from the main menu.
b. Select P)ing Info from the Monitor menu. The
current status of the first 16 pinged devices will be
displayed. (Fig. 20). Press <Tab> to view the next
16 devices.
c. You can now select another monitor function or
press <Esc> to return to the main menu.
Fig. 20 - To view the status of pinged devices,
select P)ing Info from the M)onitor menu.
8
OG113939.001