Daikin 910116725 설치 및 유지 관리 데이터 - 페이지 7
{카테고리_이름} Daikin 910116725에 대한 설치 및 유지 관리 데이터을 온라인으로 검색하거나 PDF를 다운로드하세요. Daikin 910116725 12 페이지. Ptac for pdae/pdhe & pdaf/pdhf & optional boost fan installation
페이지 인쇄
Configuration 2
Side Wall Outlet Assembly (Refer to
a. Butt end of one "L" shaped piece (rear half) of 3' Extension
Section against Primary Discharge Section and Shelf
Discharge Section. Attach to wall with screws or nails.
b. Snap second "L" shaped piece of 3' Extension Section into
section mounted on wall.
Notes: 1. When more than one 3' Extension Section is
required, repeat steps (a) and (b) for each section.
2. The grille in the adjoining room must be
non-adjustable and have a minimum of 35 sq. in.
free area.
Figure 14: Side Wall Outlet Assembly Details
ExtendAire Capacity Selection
Table 3: ExtendAire Capacity Selection
Primary
Primary Room
Active
Approximate
Grilles
Capacity %
5
60%
Table 4: Side Wall Outlet Assembly – with Boost Fan
Primary
Primary Room
Active
Approximate
Grilles
Capacity %
3
20%
4
30%
5
40%
Table 5: Shelf Discharge Assembly – with Boost Fan
Primary
Primary Room
Active
Approximate
Grilles
Capacity %
4
40%
5
50%
1
Note:
Refer to current product bulletin for total heating and
cooling capacities
IM 871-3
Figure
14)
1
Adjoining Room
Approximate
Approximate
Total System
Capacity %
CFM
40%
302
Adjoining Room
Approximate
Approximate
Total System
Capacity %
CFM
80%
334
70%
374
60%
410
Adjoining Room
Approximate
Approximate
Total System
Capacity %
CFM
60%
311
50%
356
2. Determine capacity requirements from the
Capacity Selection", Table 3, Table 4 or Table 5
required number of active grilles in space provided in top
section. Fill in remaining openings with inactive (blank)
grilles. Keep active grilles to the right and inactive grilles
to the left (when facing unit).
3. Cover joints with trim pieces.
4. Make sure there is at least 35 sq. in. free area return air
opening from adjoining room. Undercut door or provide
louver to provide return air.
"ExtendAire
and place
Page 7 of 12