Amrotec S-500 조립 지침 - 페이지 2

{카테고리_이름} Amrotec S-500에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Amrotec S-500 5 페이지. Floor stand for coin sorters

Step 1.

Locate the Lower Side Bars (2pcs) and Lower Cross Bar (1pc) as picture #1 and turn them upside down (caster

wheels on the top). Attach Lower Cross Bar with Lower Side Bars using Screws, washers, and lock washers

(8pcs each). After attaching the Lower Cross Bar, turn them in original position as picture #2 showed.

Step 2.

Locate Support Bars (2 pcs). Mount Support Bars onto Lower Side Bars using screws, washers, and lock washers

(8 pcs each) as Picture #3. During installation, please make sure that the holes for shelf bracket on the Support

Bars facing the front as picture # 3.

Locate Upper Side Bars (2 pcs). Mount Upper Side bars onto left and right Support Bars using screws, Washers,

and lock washers (8 pcs of each). During installation make sure holes for upper cross bar are facing in, as

Picture # 4.

Picture #1

Picture # 3

Picture #2

Picture # 4