Amrotec S-500 조립 지침 - 페이지 4

{카테고리_이름} Amrotec S-500에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Amrotec S-500 5 페이지. Floor stand for coin sorters

Step 5.

Place your coin sorter on the stand securely by following the steps below

Locate the 4 holes on the Upper Side Bars as Picture # 8.

Locate 4 Pin (metal rod) at the bottom of the coin sorter.

Align those 4 Pin (metal Rod) with the holes on the Upper Side cover and fit the coin sorter inside these

holes perfectly (Please have 2 persons to perform this task to avoid any injury)

2 holes on

the left

Step 6.

Once the coin sorter is on the stand securely, press the lever to lock on the 2 caster wheels which should be

located on the front side of the Floor Stand.

Picture # 8

Lever locks to be tighten securely

to prevent machine to move

around which may cause injury

during operation.

2 holes on

the right