Dr Pinball Personal DMD 설치 및 사용 지침 - 페이지 4

{카테고리_이름} Dr Pinball Personal DMD에 대한 설치 및 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dr Pinball Personal DMD 13 페이지.

1. Screen Power Cable Assembly – allows connection between the TFT Screen and the 12v

Regulator Board

2. Power Cable Assembly – allows connection between the DMD Extender and the 12V Regulator

Board

3. Composite Video Cable – allows connection between the Raspberry Pi and the TFT Screen

4. TFT Screen – Complete with power connector (Red) and video connector (Yellow)

5. 12V Regulator Board – Takes the pinball power and converts to correct voltage for the TFT

Screen

Also included are 2 cable ties to secure the various cable assemblies.

The 12V Regulator Board in detail comprises the items shown in Figure 3.

1. Adhesive Mounts X 4

2. Power In connector – labeled 'POWER IN'

3. Fuse – 500 mAmp 20mm cartridge type

4. Power Out connector – power for TFT Screen, labeled 'OUT 1'

5. Power Out connector – power for TFT Screen, labeled 'OUT 2'

It is possible to connect and power 2 TFT Screens using the 12V Regulator connectors 'OUT 1' and

'OUT 2'.

Figure 3 – 12V Regulator Board