Dr Pinball Personal DMD Інструкція з монтажу та використання - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу та використання для Пінбольний автомат Dr Pinball Personal DMD. Dr Pinball Personal DMD 13 сторінок.
Друкувати сторінку1. Screen Power Cable Assembly – allows connection between the TFT Screen and the 12v
Regulator Board
2. Power Cable Assembly – allows connection between the DMD Extender and the 12V Regulator
Board
3. Composite Video Cable – allows connection between the Raspberry Pi and the TFT Screen
4. TFT Screen – Complete with power connector (Red) and video connector (Yellow)
5. 12V Regulator Board – Takes the pinball power and converts to correct voltage for the TFT
Screen
Also included are 2 cable ties to secure the various cable assemblies.
The 12V Regulator Board in detail comprises the items shown in Figure 3.
1. Adhesive Mounts X 4
2. Power In connector – labeled 'POWER IN'
3. Fuse – 500 mAmp 20mm cartridge type
4. Power Out connector – power for TFT Screen, labeled 'OUT 1'
5. Power Out connector – power for TFT Screen, labeled 'OUT 2'
It is possible to connect and power 2 TFT Screens using the 12V Regulator connectors 'OUT 1' and
'OUT 2'.
Figure 3 – 12V Regulator Board