AMS TMD2620 사용자 설명서 - 페이지 7
{카테고리_이름} AMS TMD2620에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMS TMD2620 14 페이지. Proximity sensor evaluation module
AMS TMD2620에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (5 페이지), 사용자 설명서 (13 페이지)
페이지 인쇄
2.1.2 Log Status and Control Information
The lower right corner of the window contains status information and controls for the logging
function:
This section contains two text boxes that are stored in the log file data and used to build the file
name for the log file. If you change the data in these fields, the new values will be stored with all
new log data. The default log file name will be based on these values at the time the log file is
written. If nothing is entered in these boxes they default to a period (".").
Sample default file name:
TMD2620_1-2-3_Log_HH_MM_SS.csv
From AOS_EVM.exe
From User Input
The Count value displayed is a count of the number of samples currently in the log buffer.
The Elapsed Time value indicates the elapsed time since data logging was started.
The final field in this section controls the number of log samples that will be collected before logging
is automatically stopped and the log data is stored. If the count of log entries reaches the amount
shown in this field, the program will stop the logging function and pop up a window asking for a file
name to save the collected data. After saving the collected data the log is cleared and the count is
set back to 0.
2.1.3 System Menus
At the top of the window there are three pull-down menus labeled "File", "Log", and "Help". The File
menu provides basic application-level control. The Log menu is used to control the logging function,
and the Help menu provides version and copyright information for the application.
2.1.3.1
File Menu
The File menu contains the following functions:
page 7/13