Dr. Mach LED 115 사용 설명서 지침 - 페이지 5
{카테고리_이름} Dr. Mach LED 115에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dr. Mach LED 115 15 페이지. Spot light with led technology
페이지 인쇄Mach LED 115
2.2 Mounting the light
N
A
2.3 Wall attachment
Mark the position of the holes to be drilled in the wall using the wall bracket.
Drill the holes and insert dowels provided by the customer. Dr. Mach does not include dow-
els in the scope of supply.
For mounting the lamp see point 2.2.
2.4 Table attachment
Screw table clamp onto table.
For mounting the lamp see point 2.2.
2.5 Rail attachment
Attach light mounting in the desired position on the rail.
For mounting the lamp see point 2.2.
2.6 Round and rectangular tube attachment
Screw light mounting in desired position onto tube.
For mounting the lamp see point 2.2.
2.7 Attachment of screw-on plate
Drill attachment holes and attach with screws.
For mounting the lamp see point 2.2.
59060001
Tighten screw S in the mounting device (stand,
wall, table, rail, round and rectangular tube,
screw-on plate) after the lamp has been at-
tached. This prevents the lamp from being un-
intentionally removed.
Make sure that joint Z at the lower side of
14
transformer housing 14 is fully inserted into
tube A, so that the safety screw S engages
properly in the provided groove N.
Z
S
Edition 01
Dr. Mach
Lamps and Engineering
02.08.2012 / Bak Page 5/15