Dr. Mach LED 115 Manual de instruções de utilização - Página 5
Procurar online ou descarregar pdf Manual de instruções de utilização para Equipamento médico Dr. Mach LED 115. Dr. Mach LED 115 15 páginas. Spot light with led technology
Imprimir páginaMach LED 115
2.2 Mounting the light
N
A
2.3 Wall attachment
Mark the position of the holes to be drilled in the wall using the wall bracket.
Drill the holes and insert dowels provided by the customer. Dr. Mach does not include dow-
els in the scope of supply.
For mounting the lamp see point 2.2.
2.4 Table attachment
Screw table clamp onto table.
For mounting the lamp see point 2.2.
2.5 Rail attachment
Attach light mounting in the desired position on the rail.
For mounting the lamp see point 2.2.
2.6 Round and rectangular tube attachment
Screw light mounting in desired position onto tube.
For mounting the lamp see point 2.2.
2.7 Attachment of screw-on plate
Drill attachment holes and attach with screws.
For mounting the lamp see point 2.2.
59060001
Tighten screw S in the mounting device (stand,
wall, table, rail, round and rectangular tube,
screw-on plate) after the lamp has been at-
tached. This prevents the lamp from being un-
intentionally removed.
Make sure that joint Z at the lower side of
14
transformer housing 14 is fully inserted into
tube A, so that the safety screw S engages
properly in the provided groove N.
Z
S
Edition 01
Dr. Mach
Lamps and Engineering
02.08.2012 / Bak Page 5/15