Electrolux 241868902 사용 및 관리 매뉴얼 - 페이지 16

{카테고리_이름} Electrolux 241868902에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 241868902 42 페이지. Side-by-side refrigerator

Electrolux 241868902 사용 및 관리 매뉴얼
16
Controls
IQ-Touch
Your refrigerator is equipped with a Glass Touch
Panel user interface display. It is only necessary
to touch the glass. There is no need to press with
force. There are three dispenser modes:
1
Water
2
Ice Cubes
3
Crushed Ice
A red indicator light will be illuminated above the
active mode.
Touch the icon to activate the options below.
Any of the following options that are activated have
a red indicator light above the icon.
fast ice
fast freeze
dispenser light
control lock
vacation mode
water filter
air filter
temp display
mute sounds
TM
(some models)
Increases the production of ice
Activates a faster rate for freezing food
On / Off
Press and hold for three seconds to activate
and deactivate. This restricts undesired
changes to the refrigerators settings and
prevents use of the ice and water dispenser.
Conserves energy by increasing the time between
automatic defrost. This feature is automatically
activated during long periods between door open-
ings. Vacation mode is manually activated when
the red indicator is lit.
Touch to display filter condition status.
Press and hold for three seconds to reset.
Touch to display filter status. Press and
hold for three seconds to reset.
Touch to toggle the freezer and fridge
temps display on and off.
Touch and hold temp display to toggle
display from Fahrenheit to Celsius.
Tones emitted by each keypress can be
turned off based on user preference. The
sounds are muted when the red indicator is
lit. Warning signals will stay active.
factory default
Resets all refrigerator settings such as
temp, temp display and ring tones to their
factory default settings.
on off
Press and hold for three seconds to turn off
the cooling system to clean the refrigera-
tor. It also turns off all dispenser functions.
The temperature display will read OFF.
IMPORTANT
Pressing the system off icon does not turn off
power to your refrigerator. You must unplug the
power cord from the wall outlet.
Setting cooling temperatures
1 Touch the glass panel to illuminate the
display to the Plus (+) and minus (-)
indicators which appear on either side of the
displayed temperatures.
2 Press the + or – indicator to adjust the
temperature to the desired setting.
The temperature display will begin to blink
with the first touch. The display times out
after 5 seconds and returns to the basic
display.