Electrolux 241868902 사용 및 관리 매뉴얼 - 페이지 18

{카테고리_이름} Electrolux 241868902에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 241868902 42 페이지. Side-by-side refrigerator

페이지 인쇄

Storage Features

CAUTION

To avoid injury from breakage, handle

tempered glass shelves carefully.

NOTE

Features may vary according to model.

You can easily adjust shelf positions in the freezer

and fresh food compartments to suit your needs.

The shelves have mounting brackets which

attach to slotted supports at the rear of each

compartment.

To change the position of a shelf:

1 Before adjusting a shelf, remove all food.

2 Lift the front edge up.

3 Pull the shelf out.

4 Replace by inserting the mounting bracket

hooks into the desired support slots.

5 Lower the shelf and lock into position.

Tighten Spacers

to Remove Shelf

Loosen Spacers

to Stabilize Shelf

Against Liner

NOTE

The Cantilever Sliding Glass Shelf has spacers

(side screws) on the sides of the brackets to

securely hold the shelf in place.

To relocate the shelf to a different location, the

spacers must be turned in (clockwise). To secure

the shelf in a new location, remember to turn the

spacers out (counterclockwise) until they touch

the sides of the compartment.

Shelf features

Your refrigerator includes SpillSafe

which are designed to catch and hold accidental

spills. These shelves slide out for easy access to

food and faster cleaning.

Sliding shelves can be pulled forward as far as

their built-in stops allow. Sliding shelves cannot be

separated from their mounting brackets.

Drawers

Your refrigerator includes a variety of storage

drawers. These drawers usually are located in

fixed positions at the bottom of the fresh food

compartment.

Crispers

Crisper drawers are designed for storing fruits,

vegetables, and other fresh produce. Before storing

items in a crisper:

• wash items in clear water and remove

excess water.

• wrap any items that have strong odors or

high moisture content.

NOTE

Leafy vegetables keep best when stored with

the Humidity Control set on Higher Humidity,

or in a drawer without a Humidity Control. This

keeps incoming air to a minimum and maintains

maximum moisture content.

glass shelves,