Electrolux 807650601 사용 및 관리 매뉴얼 - 페이지 9

{카테고리_이름} Electrolux 807650601에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 807650601 39 페이지.

installation

Lift the door while adjusting the washer.To

raise the door, rotate washer clockwise (when

viewed from the bottom). To lower door, rotate

hinge.

washer counter-clockwise

(when viewed from the

........................

bottom).

Washer

Raising/Lowering

Door

Re-tighten the screw (where applicable), ensuring

it is between the spokes of the washer. Screw

will not be tight, just insert until it is flush with the

hinge.

Re,tighten

Screw

To adjust the flipper

mullion:

1 Loosen the screw located on the flipper mullion

F!ipper

Mulliiin

Adjusting Flipper MuBion Screw

2 Adjust flipper mullion height. For proper

connection with the flipper mullion guide, there

should be a separation about the thickness of a

coin (0.060 inches, or 1.5 mm) between the guide

and flipper mullion.

Screw (where applicable)

Adjusting Flipper Mullion Height

Re-tighten screw.

NOTE

If after adjusting doors higher the door makes a

popping/clicking sound, remove screw and replace

with the longer one supplied in the handle package.