Bosch Apexx SHY99A 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} Bosch Apexx SHY99A에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Apexx SHY99A 21 페이지. Dishwasher
Bosch Apexx SHY99A에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (34 페이지), 설치 지침 매뉴얼 (34 페이지)

페이지 인쇄

E n g l i s h

PLUMBING PREPARATION

(continued)

Drain Plumbing

Dishwasher Connection Piece

If the dishwasher is to drain either directly

into the household drain plumbing or through

an air gap, install a dishwasher connection

piece under the sink, as shown in Figure 8,

letter A.

Installing an Air Gap

If local ordinances require an air gap, as

shown in Figure 9, letter B, install it accord-

ing to the manufacturer's instructions.

Figure 8

Figure 9

Disposer

If a disposer is to be installed, as shown in

Ilus. 8

Ilus. 9

Figure 10, letter C, install it according to the

manufacturer's instructions. Whether the

disposer is newly installed or existing,

remove the disposer's dishwasher drain

connection plug.

DISHWASHER PREPARATION

Dishwasher preparation involves four tasks:

• Installing the Mounting Brackets

• Removing the Toe Panel

• Installing the 90° elbow fitting

• Junction Box Preparation

Installing the Mounting Brackets

CAUTION: Before installing the supplied

mounting brackets (letter E in the Materials

Figure 10/Ilus. 10

Supplied section of this manual), decide

which method of securing the dishwasher

into its enclosure will be used. Once the

mounting brackets are installed on the

dishwasher, removing them is difficult and

will damage the mounting brackets and the

dishwasher.

The dishwasher can be secured into its

enclosure in two ways:

1) Top Mount is used for countertops made

of wood or other materials that can easily

drilled. Orient the mounting brackets as

shown in Figure 11, letter A, and position the

two small tabs on the mounting brackets

over the two slots on the dishwasher's front

corners. Push the mounting brackets down

firmly to insert the tabs into the slots.

2) Side Mount is used for countertops

made of marble, granite, or other very hard

materials that cannot be easily drilled. Bend

the mounting brackets along the small holes

and in the same direction as the two small

Figure 11/Ilus. 11

tabs. Orient the mounting brackets as

shown in Figure 11, letter B, and position the

two small tabs on the mounting brackets

over the two slots on the dishwasher's front

corners. Push the mounting brackets down

firmly to insert the tabs into the slots.

(Continued on next page)

Dishwasher Preparation | Préparatio du Lave-Vaiselle | Preparación - La Lavadora