Dragonfly Ultra Acoustiweave 설치 매뉴얼 - 페이지 5

{카테고리_이름} Dragonfly Ultra Acoustiweave에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dragonfly Ultra Acoustiweave 8 페이지. Thin-bezel fixed projection screens

Fixed Projection Screen Manual

Installation Tips

Take care to pull material evenly before installing the

If waves/wrinkles are present, it may be necessary to

remove the bezel and pull the material tightly before

reattaching the bezel.

Refer to the image to the right for the best practice for

smoothing wrinkles that may be present.

Step 7. Attach and Install the Mounting

Brackets

A. Loosely secure the two mounting brackets to the sliding

nuts in the top frame using the M5 x 8mm screws. The

brackets should just be able to slide left and right.

B. Loosely secure the circular metal half of the magnets to

the lower frame, do not tighten the screws completely,

the brackets should just be able to slide left and right.

Step 8. Hang the Screen

A. Measure the overall Length and height of the screen frame.

B. For Drywall: Drill 4 holes in the wall at the desired height.

The distance of the horizontal holes should be about 2/3

the width of the frame, and the vertical distance of the holes

should be the height of the frame minus 4⅛" (105 mm).

⅔A

B-105

C. For Concrete: Drive the concrete anchors into the holes

drilled in Step B. Drive 2

anchors leaving 5mm to hang the screen. Install the lower

2 magnet pieces using 2 M5x50mm magnet screws. Hang

the screen on the upper brackets and attach the lower part

of the frame to the wall with the magnets.

bezels.

into the concrete

M5x50mm Screws

Hold in center

Smooth material

towards corners

5mm

Upper

Lower

181015-1400