Draper Ropewalker 설치 및 운영 지침 - 페이지 6

{카테고리_이름} Draper Ropewalker에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper Ropewalker 8 페이지. Electric projection screen with cable drop

Ropewalker

Section 7 - Limit Switch Adjustments

WARNING: Screen case must be engaged or retracted inside the Ropewalker case when adjusting the limits.

1. Refer to Figure 8 for the proper adjustment procedures.

2. Position of screen can be adjusted using the white down limit setting screw:

- Turning the white screw counter clockwise will cause the screen position

to move farther down.

- Turning the white screw clockwise will cause the screen position to move up.

CAUTION: Be sure all switches are in "off" position before

adjusting limit switches.

Please Note: Limits are factory set for optimum performance. Any

adjustment of these limits could void the warranty. Please check

with Draper prior to resetting limits.

CAUTION: Always be prepared to shut off manually when new

adjustment is being tested.

BOTTOM VIEW

(screen case removed)

CCW - INCREASE TRAVEL DISTANCE

DOWN

CW - DECREASE TRAVEL DISTANCE

LIMIT

DO NOT ADJUST

page 6 of 8

Figure 8

DO NOT

ADJUST!!