Draper Ropewalker Інструкція з монтажу та експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу та експлуатації для Проекційний екран Draper Ropewalker. Draper Ropewalker 8 сторінок. Electric projection screen with cable drop
Друкувати сторінку
Ropewalker
Section 7 - Limit Switch Adjustments
WARNING: Screen case must be engaged or retracted inside the Ropewalker case when adjusting the limits.
1. Refer to Figure 8 for the proper adjustment procedures.
2. Position of screen can be adjusted using the white down limit setting screw:
- Turning the white screw counter clockwise will cause the screen position
to move farther down.
- Turning the white screw clockwise will cause the screen position to move up.
CAUTION: Be sure all switches are in "off" position before
adjusting limit switches.
Please Note: Limits are factory set for optimum performance. Any
adjustment of these limits could void the warranty. Please check
with Draper prior to resetting limits.
CAUTION: Always be prepared to shut off manually when new
adjustment is being tested.
BOTTOM VIEW
(screen case removed)
CCW - INCREASE TRAVEL DISTANCE
DOWN
CW - DECREASE TRAVEL DISTANCE
LIMIT
DO NOT ADJUST
page 6 of 8
Figure 8
DO NOT
ADJUST!!