Bosch WA SERIES 사용 설명서 및 설치 지침 - 페이지 28
{카테고리_이름} Bosch WA SERIES에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch WA SERIES 32 페이지. Washing machine
페이지 인쇄
Positioning and connecting
en
The following are available from
Tip:
specialist dealers/after-sales service:
Extension for Aqua-Stop and cold
■
water supply hose (approx. 2.50 m).
Order no. WMZ2380, WZ10130.
A longer supply hose (approx. 2.20
■
m) for standard model.
Water inlet
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve in water (it contains an electric
valve).
Observe the following when connecting
the machine:
Notes
With a cold water connection, only
■
operate the washing machine using
cold mains water.
With a hot water connection, operate
■
the washing machine with hot and
cold mains water, with a maximum
temperature of 60 °C.
Do not connect the machine to the
■
mixer tap of an unpressurised hot-
water boiler.
Do not use a used supply hose. Only
■
use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.
Do not bend, squash, modify or cut
■
through the water supply hose
(otherwise its strength is no longer
guaranteed).
Only tighten the screw connections
■
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may become
damaged.
Optimum water pressure in the supply
network
At least 100 kPa (1 bar)
28
Maximum 1000 kPa (10 bar)
When the tap is open, the water flow is
at least 8 l/min.
If the water pressure is higher than this,
a pressure-reducing valve must be
installed.
Hot and cold water connection
Note:
Red hot water supply hose on the
■
hot water tap and red valve on the
appliance
Cold water supply hose on the cold
■
water tap and white valve on the
appliance
Connection to the water pipes (¾" =
26.4 mm)
Connection to the appliance
Cold water connection only
If no hot water connection is present,
only connect the cold water inlet hose
and cover the hot water connection on
the appliance so that it is kept free of
dirt
Carefully turn on the tap and
Note:
check that the connection points are not
leaking. The screw connection is under
water pipe pressure.