Draper 83611 사용 설명서 - 페이지 12

{카테고리_이름} Draper 83611에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 83611 20 페이지. Biscuit jointer
Draper 83611에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)

BASIC BISCUIT JOINTER OPERATIONS

NOTE: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

8.4 BLADE REPLACEMENT – FIGS. 4 -5

Set the height adjustment

hindrance.

Remove the four screws

Press the spindle lock button

over to gain access to the underside.

Loosen and remove the blade flange

spanner

provided.

Pass the blade out through the exposed base section.

NOTE: When installing a new blade ensure it is correct

to the direction of rotation. The biscuit jointer rotates

clockwise when viewed from above and the tip of the

blade should appear on the right of the each tooth.

8.5 CUTTING – FIG. 6

When the setup has been completed, position the

jointer up to the workpiece. For reference there are

two marks on the front cover plate which indicates the

horizontal centre of the blade

of the blade

. When aligned and the biscuit size is

set, switch on the machine and make the cut.

Switch off after use.

8.6 DUST EXTRACTION – FIG. 7

The Biscuit Jointer is equipped with a dust bag

which should be used at all times to reduce the

amount of airborne dust particles.

Suitable protective equipment should also be worn.

to maximum to avoid

and cover plate

and turn the machine

using the pin

, and vertical centre

FIG.4

FIG.5

FIG.6

FIG.7

FIG.5