Draper 83611 Руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Draper 83611. Draper 83611 20 страниц. Biscuit jointer
Также для Draper 83611: Руководство (20 страниц)
Печатать страницу
8.
BASIC BISCUIT JOINTER OPERATIONS
NOTE: Remove the plug from the socket before
carrying out adjustment, servicing or maintenance.
8.4 BLADE REPLACEMENT – FIGS. 4 -5
Set the height adjustment
hindrance.
Remove the four screws
Press the spindle lock button
over to gain access to the underside.
Loosen and remove the blade flange
spanner
provided.
Pass the blade out through the exposed base section.
NOTE: When installing a new blade ensure it is correct
to the direction of rotation. The biscuit jointer rotates
clockwise when viewed from above and the tip of the
blade should appear on the right of the each tooth.
8.5 CUTTING – FIG. 6
When the setup has been completed, position the
jointer up to the workpiece. For reference there are
two marks on the front cover plate which indicates the
horizontal centre of the blade
of the blade
. When aligned and the biscuit size is
set, switch on the machine and make the cut.
Switch off after use.
8.6 DUST EXTRACTION – FIG. 7
The Biscuit Jointer is equipped with a dust bag
which should be used at all times to reduce the
amount of airborne dust particles.
Suitable protective equipment should also be worn.
12
to maximum to avoid
and cover plate
and turn the machine
using the pin
, and vertical centre
.
FIG.4
FIG.5
FIG.6
FIG.7
FIG.5