Draper 1250W 대상 지침 - 페이지 11

{카테고리_이름} Draper 1250W에 대한 대상 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 1250W 16 페이지. Sds+ hammer drill kit

BASIC HAMMER DRILL OPERATIONS

WARNING: Prior to beginning any drilling, carefully

check the surface for the presence of electric cable, gas

or water pipes and other dangerous or damaging

contents. If unsure do not proceed.

NOTE: Remove the plug from the socket before carrying

out adjustment, servicing or maintenance.

9.1 FUNCTION SELECTOR - FIGS. 2 - 3

FIG.2: Rotary/Hammer selector

Rotary Drill

Hammer Drill

FIG.3: Rotation/Stop selector

Rotation

Chisel

(Rotation stop)

With the drill at standstill, position the rotary/ hammer

selection lever

to the right ( ). Rotate the

rotation/stop selector

This set-up is for standard drilling ie. into wood.

With the drill at standstill, position the rotary/ hammer

selection lever

to the left ( ). Rotate the

rotation/stop selector

This set-up is for masonry drilling ie. into brick, concrete,

block work, etc.

With the drill at standstill, position the rotary/ hammer

selection lever

to the left ( ). Rotate the

rotation/stop selector

This set-up is for chiselling with the chuck rotation stop

engaged ie. chiselling/chasing out brickwork,

plasterboard, etc.

9.5 TRIGGER SWITCH - FIG. 4

Select the required function. Pull trigger

the machine.

to the left ( ).

to the right ( ).

FIG.2

to activate

FIG.4

FIG.3