Draper 1250W 대상 지침 - 페이지 13

{카테고리_이름} Draper 1250W에 대한 대상 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 1250W 16 페이지. Sds+ hammer drill kit

10. MAINTENANCE

10.1 GEARBOX MAINTENANCE FIG. 6

NOTE: Remove the plug from the socket before carrying out

adjustment, servicing or maintenance.

Before each use remove the gearbox access cover

ensure there is sufficient grease. Using pin spanner

remove the access cover

top-up the gearbox (20 grams max.) using a general purpose

lithium based grease.

WARNING: Assembly must be completed prior to operating

the machine.

The hammer drill does not require any special maintenance.

Regularly clean/vacuum the ventilation slots. Use only a mild

cleaner and a damp cloth to clean the tool.

NOTE: Remove the plug from the socket before carrying out adjustment, servicing or

maintenance.

PROBLEM

Motor does not start.

For a full range of optional accessories, please refer to your local Draper Stockist.

anti-clockwise. If required

POSSIBLE CAUSE

1. Fuse.

2. Brushes worn.

3. Unsure.

FIG.6

REMEDY

1. Replace/reset 13 amp time

delay fuse or circuit

breaker.

2. Have carbon brushes

replaced in motor.

3. Return to an authorised

service agent for diagnosis.