Draper 56405 매뉴얼 - 페이지 13

{카테고리_이름} Draper 56405에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 56405 20 페이지. 230v 5.2kg sds+ rotary hammer drill

BASIC HAMMER DRILL OPERATIONS

9.3 HAMMER DRILLING – FIGS.6 – 7

– Rotate the drilling/chiselling selector (7) to the

hammer and drill setting.

– Switch the rotary/hammer selector (5) to the drill

and hammer setting.

This combination of settings is recommended for

drilling holes in concrete and masonry. Hammer

action will be in operation and the drill bit will rotate

accordingly.

9.4 CHISELLING (NON-ROTATING) –

FIGS.8 – 9

– Rotate the side drilling/chiselling selector (7) to

the hammer setting.

– Switch the rotary/hammer selector (5) to the drill

and hammer setting.

With this combination of settings, hammer action will

be in operation, but without rotation of the chisel

accessory. This operation is best suited for chiselling

out or 'chipping off' masonry and brickwork, chasing

out brickwork, plasterboard, etc.

FIG.6

FIG.7

FIG.8

FIG.9

- 13 -

(7)

(5)

(7)

(5)