Draper CS14A 사용 설명서 - 페이지 8

{카테고리_이름} Draper CS14A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper CS14A 12 페이지. 350mm chop saw
Draper CS14A에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

1. CUTTING HEAD LOCK (Fig.2)

When the saw is not in use the lock ✪✌ should be

used. To release pull the pin out and raise up the

head. To lock in the down position, lower the head

and push in pin until it engages.

2. ON/OFF SWITCH (Fig.3)

To start the chop saw, press the trigger locking

button ✫✌ and press the trigger ✬✌

simultaneously. The button ✫✌ can be released

and the saw will continue running until the trigger

ie released.

NOTE:

We suggest that when the machine is not in use.

The trigger be locked in the off position using a

padlock ✭✌ (not supplied) (Draper Tools

recommend Stock No. 60177).

3. ADJUSTING CUTTING DEPTH (Fig 4)

For deeper cuts screw the adjusting screw ✮✌

clockwise. For shallower cuts, screw ✮✌

anticlockwise when set in position use locking nut

✯✌ to secure in place.

4. WORK CLAMP (Fig 5)

For quick adjustment, disengage quick release

lever ✰✌. The vice clamp ✲✌ can now be pushed

in or out to accomodate the workpiece. Engage

the lever ✰✌ and finish tightening using the

clamping handle ✱✌.

OPERATION & USE

Fig. 2

✪✌

Fig. 3

✫✌

✬✌

✪✌

Fig. 4

✮✌

✯✌

Fig. 5

✲✌

✰✌

- 7 -

✭✌

Fig.2.

✱✌